Psion Teklogix 7525C User Manual Page 200

  • Download
  • Add to my manuals
  • Print
  • Page
    / 364
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 199
Chapter 6: Settings
Ending A Connection
170
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
6.24.5 Ending A Connection
When connected through a modem or VPN connection, tap on the connec-
tivity icon
––in the menu bar, and then tap on Disconnect.
When connected with a cable or cradle, detach the cable from your WORK-
BOUT PRO.
When connected through a network (Ethernet) card, remove the card from
the WORKABOUT PRO.
6.24.6 Proxy Server Setup
Note: If you are connected to your ISP or private network during synchroniza-
tion, the WORKABOUT PRO will download the appropriate settings dur-
ing synchronization from your PC. If these settings are not on your PC, or
if they need to be changed, you’ll need to set up the proxy server connec-
tion manually.
To set up the proxy server connection manually, you’ll need the following
information: proxy server name, server type, port, type of Socks protocol used and
the user name and password.
1. Tap Start, Settings. Tap on the Connections tab followed by the Connec-
tions icon.
2. Under My Work Network, tap on Set up my proxy server.
Figure 6.75 Proxy Settings Tab
3. Add a checkmark next to This network connects to the Internet and This
network uses a proxy server to connect to the Internet.
Page view 199
1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 363 364

Comments to this Manuals

No comments