Psion-teklogix Win CE 4.2 User Manual Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 152
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
Chapter 2: Getting Started
Passwords
12
Psion Teklogix NETBOOK PRO Win CE 4.2 User Manual
To switch o ff :
press and hold the Fn key, then press the Esc/On button to turn off the
NETBOOK PRO. You can switch off at any time. You do not have to save
information stored in the NETBOOK PROs internal memory, as it is automati-
cally saved for you. If you are working with a file on a memory card, save the
file before switching off the NETBOOK PRO and removing the card.
Note: If you do not use the NETBOOK PRO, it will automatically switch off
after a few minutes to save battery power. To continue using the NET-
BOOK PRO where you left off, switch the NETBOOK PRO on again
using the On/Off button. Your information will be saved as long as the
backup battery retains charge. See “Power Management” on page 14 for
information on checking battery-charge levels and power settings.
2.3 Passwords
The NETBOOK PRO may be configured to require a password when it is turned on.
To do this:
1. Select Start, Control Panel. The Control Panel appears.
2. Double-click on the Password icon. The Password Properties dialog
appears:
3. Enter a new password, and enter it again to confirm it. The Enable
Password Protection section of the dialog becomes active.
4. Select the At Power On checkbox to enable the power-on password.
5. Press the OK button. When the NETBOOK PRO is turned on, it will
request the power-on password before opening the Desktop. Changes
to the Owner and Password settings will also require the password.
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 151 152

Comments to this Manuals

No comments