Psion Teklogix 7525C User Manual download pdf (Page 217)

WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 181

Chapter 6: Settings

Decoded (Intermec ISCP)

Low Power Timeout

To extend laser life, you can select the length of time the scanner remains active

following a successful decode. The scanner wakes from low power mode when a

bar code is scanned – a successful decode restores normal blinking.

When you double-tap on this parameter, a dialog box is displayed in which you can

choose a value of 30 sec, 1 min, 2 min or 3 min.

Note: This parameter is only used if the Trigger Mode has been set to Continu-

ous On and the hand-held is mounted in a fixed position; otherwise, ‘Low

Power Timeout’ is not used.

Parameter Scanning

Setting this parameter to Enabled allows decoding of parameter bar codes.

Same Read Validate

The data is only transmitted after repeated reads give the same result. The

value assigned at this parameter determines the number of reads required, from

0 to 10 times.

Same Read Timeout

Prevents the same bar code from being read more than once. The value assigned

determines after what time period the scanner will timeout, from 0 to 2550 msec.

Diff Read Timeout

Prevents unwanted reading of other bar codes on the same label. The value assigned

determines after what time period the scanner will timeout, from 0 to 2550 msec.

6.25.3.3 Code 39

Enable

Setting this parameter to on enables “Code 39”.

Full ASCII

If this parameter is enabled, the characters +, %, and / are used as escape

characters. The combination of an escape character and the next character

is converted to an equivalent ASCII character.

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 395 396

No comments

Psion Teklogix 7525C User Manual Page 217