Psion Teklogix 7525C User Manual download pdf (Page 281)

WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 245

Chapter 6: Settings

Tools Menu

To activate the automatic connection mode:

• Tap on the OK button.

While automatic connection mode is enabled, the Connect Data button in the main

Wireless LAN dialog box changes to Disable Auto.

To close the currently active connection (if any) and disable the automatic

connection mode:

• Tap on Disable Auto

Important: Automatic connection mode should not be used if applications

other than the Wireless WAN user interface (e.g. Connection

Manager) are expected to open and close connections.

If the automatic connection mode is enabled and another applica-

tion closes the packet data connection, the WWAN user interface

will immediately try to re-establish the connection.

Use Virtual Serial Port

If Use virtual serial port is enabled, packet data connections are established through

the virtual serial port of the WWAN driver rather than through the WWAN driver

directly. This checkbox should only be checked if certain third-party VPN (Virtual

Private Network) clients are used that do not work correctly otherwise. The default

setting is disabled (unchecked).

Note: The connection setup takes longer through the virtual serial port.

Enable Automatic Configuration

In most cases, the data connection is configured automatically and no user

interaction is required. This is true even if multiple SIM cards from different

operators are used with the same device. The connection parameters are adjusted

automatically when a new SIM card is detected (this may require a reset). The

connection parameters are retrieved from a database.

Manual configuration should be necessary only if:

• One or more parameters in the database are incorrect or a new operator is

not yet in the database. (The database should be corrected for subsequent

software releases.)

• An operator has assigned individual packet data user names and passwords.

• A very large site has their own APN. Such connections always have to be

configured manually.

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 395 396

No comments

Psion Teklogix 7525C User Manual Page 281