Psion Teklogix 7525C User Manual Page 223

  • Download
  • Add to my manuals
  • Print
  • Page
    / 396
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 222
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 187
Chapter 6: Settings
Decoded (Intermec ISCP)
Addendum
An addendum is a separate bar code, supplementary to the main bar code.
This parameter provides two options: Not Required but Transmitted if Read or
Required and Transmitted.
Double-tap on Addendum to display a dialog box listing your options.
Highlight an item, and tap on OK.
When “Addendum” is set to Not Required but Transmitted if Read, the scanner
searches for an addendum and if one exists, appends it to the main bar code. When
the parameter is set to Required and Transmitted, the scanner does not accept the
main bar code without an addendum.
Addendum Add-on 2 And Addendum Add-on 5
Enabling these parameters sets the length of the addendum bar code to either 2 or
5 characters.
GTIN Compliant
GTIN (global trade item number) processing transmits EAN 128 as the 14-character
EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128
symbology.
Important: When EAN 128 and GTIN processing are both activated, it is not
possible to read normal EAN 128 Codes.
Reading Range
This parameter determines the reading distance from which a bar code can be
successfully scanned. The default setting, Extended, allows for increased
reading distance.
6.25.3.10 Code 93
Enabled
Set this parameter to on to enable “Code 93”.
Page view 222
1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 395 396

Comments to this Manuals

No comments