Psion Teklogix 7525C User Manual download pdf (Page 242)

Chapter 6: Settings

Options Tab

206 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual

6.25.5.1 Double Click Parameters

Click Time (msec)

This parameter controls the maximum gap time (in milliseconds) for a double-click.

If the time between the first and second clicks of the scanner trigger is within this

time, it is considered a double-click. The allowable range is 0 to 1000. A value of

zero disables this feature.

A double-click produces different results depending on whether or not a value is

assigned in the “Click Data” parameter. When a value is not assigned for the “Click

Data”, double-clicking the scanner trigger overrides the target dot delay set in the

“Dot Time” parameter and initiates a normal scan sweep. If a value is assigned for

the “Click Data” parameter, double-clicking the scanner trigger inserts the “Click

Data” value rather than initiating a scan.

Click Data

For both integrated and external scanners, this parameter determines which

character is sent to the application installed in your hand-held following a double-

click. A dialog box appears, asking that you press the key you want to insert. The

ASCII/Unicode key value of the keypress is displayed.

6.25.5.2 Display Parameters

Scan Result

When this parameter is enabled, the type of bar code and the result of the scan

appear on the screen. Note that this information is only displayed after a successful

decode and is visible only while the scanner trigger is pressed. When the trigger is

released, this information is cleared from the screen.

Scan Indicator

When this parameter is enabled, the laser warning logo appears on the display

whenever the scanner is activated.

Scan Result Time (sec)

The value assigned to the “Scan Result Time (sec)” parameter determines how long

the scan results of a successful scan are displayed on the screen. Time is measured in

seconds, and a value of “0” (zero) disables the parameter. When you choose this

option, a dialog box appears where you can enter a value.

1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 395 396

No comments

Psion Teklogix 7525C User Manual Page 242